Tom Clarke ATAC TV HK USC Carbine Fail to Eject or Extract Malfunction

HK USC Carbine Failure to Eject or Extract Clearance

Tom Clarke ATAC TV Firearms Channel demonstrates the possible malfunctions of the HK USC Carbine. Knowing the cycle of operation and the configuration of the firearm will help understand how the gun functions, and indicating how it will malfunction. 

The HK USC is a very reliable blowback system with a very large ejection port. Big ejection ports are a good thing and allow the extracted brass plenty of room to eject out of the firearm. There is a down side to the configuration of the carbine. The barrel or chamber of the carbine is recessed forward of the ejection port by about an inch. Also there is space between the barrel ring and the inside of the firearm port large enough to trap extracted brass if it is not ejected. The bolt continues to cycle, stripping a new cartridge out of the magazine and into the chamber, while ramming the spent brass into this recess. 

Tom Clarke and Mark Flinn spent considerable time inducing malfunctions with the USC carbine in many different scenarios. This is the only malfunction other than Fail to Fire that the carbine tends to create. This is a real problem to clear the malfunction and get the firearm running again.  As Tom suggests, this would be a great time to transition to a back up weapon system and run for cover.

The clearance for this type of malfunction involve removing the magazine, locking the bolt back with the bolt stop lever and digging the brass out of the port with your fingers and /or some type of tool. When the empty brass lands just right inside the port, the bolt slams the brass into the recess and makes it really hard to pry the deformed casing out of that area.  It turns into the “luck of the draw” where the brass might fall out, or must be pried out with a tool.  This may be something that will take time and tools to fix.

The HK USC Carbine is a great shooting, light-handling firearm with plenty of punch. The ATAC guys have fired a lot of ammunition through these guns and did not experience any malfunctions other then the ones produced by the staff on purpose. Even when extremely dirty, the firearm performs flawlessly. If you know your firearm, you will find any limitations that may affect the performance of that particular weapon system. Again, training is the key to understanding you’re your performance with any firearm. Watch Tom Clarke and Mark Flinn explain the details of the HK USC Carbine in the video linked below. Keep training!

Watch the ATAC TV Firearms Video Here:  HK USC Carbine Failure to Extract or Eject Video

ATAC TV, Raw and Unscripted Firearm Training and Products Reviews


Tom Clarke ATAC TV

Tom Clarke ATAC TV Saiga Shotgun Grip and Stance Video

Check it out, the Saiga 12 Shotgun Grip and stance video is now playing on ATAC TV Firearm Channel.

 Saiga Shotgun Grip and Stance
Controlling the recoil of any shotgun starts with a solid grip and stance. The program explains the four points of contact; Firing and Support Hand Grip with a good Stock & Cheek weld. Sit back and watch the Saiga12 shotgun program, take notes or go back and watch it again. Jim Fuller and Mark Flinn show you step by step in this instructional video.

Watch it here on ATAC TV Firearms Channel:  Saiga Shotgun Grip and Stance Video

Tom Clarke ATAC TV

Tom Clarke ATAC TV Venom Tactical Gas Block for AK-47

The AK-47 gas block combines the front sight and gas block into one assembly. We have sold hundreds of these assembly’s. They have proven to be very reliable under combat conditions.

The combination gas block/front sight allows the front end of the AK-47 and AK-74 to be lightend up and makes the handling of the weapon noticeably more efficient. The assembly also allows the barrel length to be shortend for you guy’s that want to SBR your AK’s.

The front sight is adjustable for windage with a simple screw driver. For elevation the sight post is left purposly long so that you can zero your rifle and then use the rear sight as normal.

The id of the sight is .591 and clamps in place in the exsiting gas block location. This gas block is designed for 45 deg angled gas ports like the Romanian AK barrel.

The sight comes finished in black oxide.

For more info on the gas block please follow the link below.

https://www.venomtactical.com/shop/gas-block-p-72.html

Designed by Lenny Bolton
Produced by VENOM TACTICAL

Tom Clarke ATAC TV

ATAC TV, Raw and Unscripted Reality Firearm Training and Products Reviews

Tom Clarke ATAC TV HK USC Tactical Reload

Tom Clarke explains why and how to perform the tactical reload with the H&K USC Carbine. Mark Flinn demos how simple it is. Do not only tactical reload your USC Carbine, but also your carrier. It is a very simple procedure, but you must practice this and have it be part of your training program. Remember, there is so much more than just shooting at a target during your training.

Watch the video here on ATAC TV Firearms Channel:  H&K USC Tactical Reload Program

ATAC TV, Raw and Unscripted Firearm Training and Products Reviews

Tom Clarke ATAC TV

Tom Clarke ATAC TV HK USC Fail to Fire Malfunction Clearance

Tom Clarke and Mark Flinn with ATAC TV Firearms Channel show you the correct technique to clear the Fail to Fire malfunction. What do you do when you are pointed in at a target with your HK USC Rifle and press the trigger and you get a click instead of a shot firing? There are usually only two reasons for this issue. You forgot to load the chamber when you inserted the magazine, or the cartridge in the chamber is faulty or “bad”.  Either way, you meant to shoot at something, and need to fix this and get the firearm running fast.

Here is the Clearance for Fail to Fire with the HK USC Rifle:

  • You get a click, trigger finger goes straight to reference point on frame.
  • Support hand moves to and pushes the magazine into the well and pulls out to make sure the magazine is seated. 
  • Support hand then moves to cocking lever, pulling the lever back till it stops and releases the cocking lever allowing the recoil spring to close the bolt. 
  • Back on sights and target.

This is an easy malfunction clearance, but most people do not train these movements to become proficient in the clearance.  Train like your life may depend on it, because someday it might?  Are you going to win or lose?

Watch the ATAC TV Firearms Video Here:  HK USC Fail to Fire Malfunction Clearance

ATAC TV, Raw and Unscripted Firearm Training and Products Reviews

Tom Clarke ATAC TV